12 volt Battery Charger Car Charger Sprayer Battery Charger

AUTO RECOVERY
AUTO POWER OFF
REVERSE POLARITY PROTECTION
USING IMPORTED PWM CHIPS

Product name
12V6A
Clip + GB plug
Input voltage
100-245V 50HZ
Size
156*90*60mm
Charging voltage
14.4V
Weight
0.364Kg
Recharging current
5-6A
Applicable battery
Lead-acid batteries 12V28AH-80AH

Attention:
1、The voltage of battery MUST matches the output voltage of battery charger.
2、Connect clips to the battery first,then connect plug to AC power.
3、Keep ventilation,far from moisture,flammable&explosive items
4、Do not open the products

Smart charger the”golden partner”of batterie
three stage intelligent float charging syste

CONSTANT CURRENT
integrated operational amplifier technolog,precise control of charging curren,no matter how large the battery is,constant charging current is set value,battery protection,prevent overcharge and shorten battery life.

VOLTAGE LIMIGING
precise sampling,stable reference and pulse width modulation(PWM)technology are adopted,ensure that the output voltage is not higher than the set value and below the full value.

AUTOMATIC FLOATING CHARGE
the product can automatically detect the voltage at both ends of the rechargeable battery and the power deficit of the rechargeable battery,thus the output charging voltage and charging current can be controlled,when charging current is close to full value,lts internal automatic change of charging capacity,make the output floated,protecting storage batteries and protecting charging capacity.

ATTENTION PLEASE!
1、Red clip connects battery plsitive and black negative
2、It is strictly forbidden to use in explosive gas environment
3、Please use it indoors to prevent rainwater from getting wet
4、When switching on or turning on the battery,please disconnect the 220V power supply first