Marx Generator Finished Product Kit Man-made Lightning Pulse High Voltage Arc DIY High-frequency Transformer

$100.00

Arc at level 6: 8-10 cm long and up to 100 kV
Arc at level 10: 15-20 cm long and up to 200 kV
Arc at level 20: 25-30 cm long and up to 300 kV

SKU: N/A Category:

The Marx generator uses a 10-20kV high voltage DC power supply. Its output voltage is up to tens of thousands to hundreds of thousands of volts. It can be used for high voltage pulse power supply experiment and teaching of electromagnetics.

Arc at level 6: 8-10 cm long and up to 100 kV
Arc at level 10: 15-20 cm long and up to 200 kV
Arc at level 20: 25-30 cm long and up to 300 kV

Discharge frequency: 0.3-3 times/sec

A Marx generator can produce intense electronic interference. So, it is not recommended to use a switching power supply. It is recommended to use electromagnetic interference-resistant power sources such as lithium batteries, lead acid batteries and transformers to power the ZVS high-voltage power supply. At the same time, it should be kept at least 3 meters away from electric appliances to avoid electromagnetic interference.

The connection method between a flyback transformer and a Marx generator is shown in the following. It can also be connected directly to the two screws above.

Series

6, 10, 20